Author Archives: Woolace and Johnson

What is considered a plumbing emergency?

fixing a plumbing emergency

Help When You Need it Most

Is a sink, toilet, or tub overflowing considered emergency plumbing services? Probably depends on your outlook, right? If you’re the one standing in a growing puddle of waste flowing over the toilet bowl, you’ll see that situation in need of emergency plumbing repair. To a professional plumber, though, would that be a valid reason to request emergency plumbing service?

Is a clogged toilet a maintenance emergency?

If you only have one bathroom with a toilet, it gets clogged, and it overflows, you can attempt a few things to stop the flowing and get the clog to pass through to avoid emergency plumbing services.

Remove the lid from the tank and lift up the lever so that the water quits filling the bowl and tank. Next, using a home style plunger, plunge the toilet bowl several times, attempt the flush. Repeat as needed. If, after several attempts, the clog doesn’t bust on through and the toilet keeps overflowing; you need emergency plumbing services.

Logically, if you have a second bathroom with a working toilet, it would be worth saving you money and wait to call for plumbing services during regular business hours.Emergency plumbing services are typically those calls that are after hours Monday – Friday, on holidays or weekends.  While plumbing contractors are available during those times, it will cost you more than a normal day and time.

plumbing leak

Is a leak an emergency?

If you can see a leak, then it qualifies for emergency plumbing services, except for a small drip under the sink. That is a minor repair as long as you address sooner than later. Let that small drip under the sink go unaddressed, you’ll be calling for emergency plumbing services in the near future.

What about a leak that doesn’t appear too bad? A small leak is often a warning that there are bigger plumbing problems you can’t see.From a dripping drainpipe under bathroom or kitchen sink to water stains on the ceiling or a wall, you have a bigger plumbing problem than just a “small drip”. It may not justify as worthy for emergency plumbing services, but it need not be ignored. 

What to do if you have a leak?

1.    Turn Off The Water: Immediately find the water meter and turn the water off at the meter. This will stop any more flooding and damage. If you can’t turn it off, you must request emergency plumbing services from the city or a plumber.

2.    Documentation: This step is more for your insurance claim, but documentation is important before any clean-up or repairs are done.  This includes pictures, videos, and notes.

3.    Notify Insurance Company: Notifying the insurance company is the next call you need to make after you have the water turned off. They will have instructions for you and may have a list of qualified plumbers to provide.

4.    Determine the Source:  Look for a possible leak source, but if you aren’t finding it, call a professional plumber for emergency plumbing services. They will examine the damage already done to help them source the leak and go from there.  

5.    Fix the Issue: If you can make the repair yourself, that’s great! That saves you a deductible out of pocket and probably will be done faster than if you call emergency plumbing services. If you can’t fix it yourself, call a plumber. 

Who can fix water leaks?

When it comes to plumbingleaks, the best person to call is a professional plumber. If you have a handyman you use, they can often provide emergency plumbing services, but if it is something outside of their ability and scope, you must call a plumber. Making a plumber your first call gets the repair done faster and circumvents a lot of stress.  

If you don’t have a plumber on your speed dial, search on the internet foremergency plumbing services near me” and you will find several listed. Keep in mind the first ten listed are necessarily there because they are the best. This is how their Google listing falls by different factors, including Google’s algorithm.

How long do emergency plumbers take?

This is all dependent on what time of the day, what day of the week you call, and if it is a holiday. Non-business hours, it could take an hour or more to hear from a professional plumber that has an answering service about their calls for emergency plumbing services.

The repair will depend on what is wrong, where the emergency is within your home, and if any emergency parts oremergency plumbing fixtures are needed. If the plumber doesn’t have something on their truck, they will have to order it, which could be the next business day. 

leaking faucet and plumbing emergency

Closing Thoughts

It is important to know what we consider a need for emergency plumbing services. We have listed five that are definitely worthy of making that call:  

  • Flooding risk: If you have a busted water pipe, sewer backing up, flooding, or the water won’t shut off, these are all emergency plumbing services because of the potential damage they could cause.
  • Sewer back up: A backed up sewer line can get to a health hazard point and can be challenging to live with too.
  • No running water: If you don’t have running water in your house that isn’t because of the city or other scenarios beyond your home, this is one of the emergency plumbing services you need to call a plumber.
  • Busted water pipe risk: If you have frozen pipes and spigots, you have the potential for emergency plumbing services if they thaw or if they become so frozen, they bust because they expand and crack.

How do I clean out my main sewer line?

concrete sewer pipe

How often should you clean out your sewer line?   

There are several components and systems in your home that cause regular maintenance. The HVAC system, the air ducts, and one of the ugly parts of home-ownership… cleaning the sewer line. It is a nasty job, but it is something that needs to be done to keep your home “flowing” as it should.  Sewer line cleaning can greatly improve your plumbing system immensely. You may not realize it wasn’t working right until after you have had it cleaned. 

Well, when your sewer line is clogged is definitely a time to have it cleaned, that’s a no brainer. By scheduling a routine pattern of sewer line cleaning though, you can prevent from having those emergency calls.  For an older home, expert plumbing contractors recommend a sewer line cleaning job be every 18 months and no longer than 22 months in between cleaning. 

If your home has been having frequent issues with the sewer lines, cleaning them may not be enough. Call an experienced plumbing contractor and request a video inspection.  There may be something more than your sewer line is clogged, and a professional plumbing contractor will have the proper sewer line cleaning equipment to do the job right based on what the video inspection finds. 

How do you know if your sewer line is clogged?

Things aren’t draining and flowing as they should, so how do you know if it is a simple clogged line, or it is the main sewer line to your house? Here are three signs that will tell you it is the main sewer line and if you may need a professional plumber to do a main sewer line cleaning: 

  • More than one drain is backed up
  • Water is overflowing into different fittings
  • The sewer clean-out has drainage in it 

So, what do each of those mean? Keep reading as we give you a detailed description and a closer look: 

Sign One: More than one drain is backed up. When the main sewer line clogs up, it will cause every drain in the house to back up, not just one. When it is just a simple clogged line, like the kitchen drain, we isolate the problem to one drain. 

Think of the sewer system for your home as a tree. The trunk of the tree is the main sewer line and the branches are the sewer lines that run to each water appliance.  Like a tree, if something is wrong with the trunk, the branches can’t grow and bloom. With your sewer system, if something is wrong with the main line, the smaller sewer lines can’t drain, so the waste material and water back up. 

Still not 100% sure if there is just one line or multiple lines backed up? Are any of these plumbing fixtures gurgling?   

  • Bathtub
  • Shower
  • Sink
  • Toilet

If more than one, or worse, all of them are, then you haves a clog in the main sewer line. The wastewater is moving slowly around and past the clog then hitting air pockets. That forces bubbles to surface and creates a gurgling sound. The more wastewater, the louder the sound and you’ll begin noticing a nasty sewer smell. Time to call a professional plumber for main sewer line cleaning! 

Sign Two:  Water is overflowing into different fixtures. Water will start backing up into other fixtures if there is a clog in the main sewer line because one of the branch drain lines is can’t drain into the main sewer line. The wastewater backs up and overflows into another drain line. 

This is where gravity comes into the plumbing: Water seeks the lowest level, so when it is overflowing, it will find the floors and the basement. If you aren’t sure this is what’s going on in your house, do the following test: 

  • Flush the toilet and check the shower or tub for any gurgling sounds.
  • While using the washing machine, when it drains, is it backing up in the shower, sink, or toilet?
  • When you turn on the faucet in the bathroom sink, does water bubble or rise in the toilet? 

If you answer yes to any of those three tests, you haves a clog in the main sewer line and a professional plumber can do a sewer line cleaning to fix this problem. 

Sign Three: The sewer clean-out has drainage in it:Somewhere outside your home there should be a circular or concrete lid labeled “clean out”. Homes built prior to 1978 are an exception to this if the plumbing hasn’t been updated. 

Remove the cap from this and if there is sewer wastewater flowing out or standing in the pipe, you have a clog in your sewer line. Again, a professional plumber can do a sewer line cleaning for you and inspect the entire plumbing system to make sure there aren’t any other problems. 

sewer line exposed

How do I know if my sewer line needs to be replaced?   

Because they are out of sight, they are out of mind, and this leads to neglect for the sewer lines. Many homeowners don’t realize they should give attention to these until they have a problem, like sewer line cleaning. Knowing what could indicate if you have the possibility of a sewer line clogged or broken, you can sometimes head it off with repairs.  The most common signs that are your sewer lines are telling you something: 

  • Slow draining bathtub, sinks, toilets
  • Water pressure low in shower or sing, toilet bowl water level varies
  • Sewer backup and blockage constantly
  • Pipes leaking in the house
  • Water pooling and standing in the yard, foul odor from those puddles and wet spots where there shouldn’t be
  • Gas odor lingering around the property
  • Ceiling and walls have mold growing on them
  • Super lush and thick green grass in the yard
  • Lawn has a dip or indentation where the main sewer line lays
  • Foundation slab has developed cracks, has a void, or sinkholes around the house
  • Basement or foundation have flooding or water spots around the drains with a foul sewer odor
  • Persistent insect or rodent infestation problem
  • Loud gurgling noise coming from pipes as water flows while showering or washing dishes
  • Water bill increases suddenly 

How long does sewer line last? 

The normal lifespan of a sewer line 50 year and some last as long as 100 years. Factors that can make the difference is how the sewer line pipe was installed originally and what happens to the ground over the years and if routine sewer line cleaning is performed as recommended by professional plumbers. 

Can toilet paper clog a sewer line?  Toilet paper is not a major culprit to a clogged toilet. It only clogs the toilet when there is something else in the sewer line like a child’s toy, tree roots busting through the sewer line, or a low flow toilet doesn’t have enough push power. Regular sewer line cleaning by a professional plumbing contractor will catch these issues and get them out of the way so that you don’t have toilet paper clogging issues. When you need sewer line cleaning in Stryker, Bryan, and Napoleon, OH, call 419-546-0065.  

Why is My AC Running but Not Cooling?

air conditioning repair

Why is My AC Running but Not Cooling?

If your air conditioner is running but it isn’t cooling the house, there are a number of different reasons why this may be the case. The first reason is pretty straightforward and easy to solve. Check the air filter in your HVAC unit to see if it is dirty or clogged. If it is, that could be the problem. If your air filter is dirty or clogged, there may be no airflow over the evaporator coils. Replacing the air filter is an easy and inexpensive fix. Another reason why your air conditioner may be running but not cooling is that there could be an issue with your fan or the fan motor. Usually, the fan will draw air over the cold evaporator coils and then re-circulate the air back into the room. When the fan is not working properly, very little air will flow over the evaporator coils.

How Do You Troubleshoot a Home Air Conditioner?

Would you like to learn more about how to troubleshoot a home air conditioner? The steps are fairly easy. Please review the following bullet points to learn more.

  • First of all, check your thermostat to ensure that it is set to the appropriate temperature that you desire. 
  • The second thing that you should do is take a look at the condenser. If it is dirty or blocked, that may be the problem.
  • Next, clean or change the air filter in your HVAC unit. It is generally recommended that homeowners change their air filters every three months.
  • After that, you can see if any ice has formed on the coils of the air conditioner.
  • Finally, you can check or clean the outdoor compressor.

How Do I Reset My Air Conditioning Unit?

In order to reset your air conditioning unit, the first thing that you should do is shut down your AC at the thermostat. You can find the shut-off switch on the air conditioning unit. Next, you will need to locate your circuit breaker box. If your home indeed has a basement feature, the circuit breaker box may be located there. Closets and crawl spaces are other places to inspect for the location of the circuit breaker box. Make sure that once you locate it, the AC unit is switched to the “off” position. You will need to wait thirty seconds before turning the circuit breaker back on. Homeowners can next turn the AC thermostat back on.

How Do I Test My Home AC?

Air conditioning repair is critical in the throes of summer. However, testing your AC before summer hits is a good way to safeguard against an unexpected HVAC emergency. In order to get started, locate the closest supply air duct to the indoor AC unit. Find a thermometer and tape it inside the unit. Allow the air conditioner to run for about ten minutes. Record the temperature.

Why Did My AC Suddenly Stop Working?

Has your air conditioner suddenly stopped working? The reason may be fairly simple, like a tripped circuit breaker. Scheduling regular maintenance visits will assist in terms of making sure that you don’t have any air conditioning emergencies.

Air Conditioning Service and Repair

There are a number of excellent air conditioning companies across the country. But which one to choose? When selecting an air conditioning company, it is important to choose one that is both local and reputable. Are they insured? Do they have any applicable certifications? Do they administer emergency air conditioning and heating service? These are all important questions to ask. Please feel free to conduct an internet search or ask a friend or neighbor for a referral. Knowing you have an HVAC company you can trust is important.

Air Conditioning Repair Near Me 24 Hours

It is important to note that when an HVAC company is called after hours, they will generally charge an extra fee. The convenience of having an emergency HVAC repairman comes with the added expense of the privilege.

Air Conditioning Repair for RV

How is the air conditioning functioning in your RV? If it isn’t working well, it may need to be replaced. Most RV air conditioners are not engineered to be opened and repaired. Even if an air conditioner repair for an RV is possible, it will be expensive. Generally speaking, most RV technicians replace any roof AC that exhibits significant problems.

air conditioning repair

Air Conditioning Repair or Replace

Are you wondering whether your air conditioning needs to be replaced? Significant problems with an air conditioning unit will mean that there is a strong consideration with regard to the cost-benefit analysis of repair or replacement. If the necessary repairs cost more than half of an AC replacement, it’s probably a better investment to move forward with an AC replacement. In order to get a realistic view of what must be done, please schedule an appointment with a reputable HVAC repairman.

You need an HVAC company that knows how to complete air conditioning repair in Stryker, Bryan, and Napoleon, OH, with proven results. Call Woolace & Johnson at 419-546-0065 to speak with our staff about making an appointment today!

How do you find leakage?

flooded floor in kitchen from a leak

Can a water leak fix itself?

A water leak can annoy, worrisome, and expensive! Once you have noticed a water leak ceiling or under other areas of your home, all you can think about is getting it fixed. Before you can get it fixed though, you need to find where the water leak or water break is at, and that is often the hump that slows down the repair. The homeowner can sometimes do a water leak in wall repair, other times it requires a professional plumber and maybe a drywall contractor. 

We have known it to happen. Your next question is probably “How can a water leak fix itself?”, and that is a legitimate question with a somewhat scientific answer: Metal calcifies.  This is more likely to happen in areas with hard water because it has enough calcium in the water to become calcified, forming a seal where the leak is. A sure way to get a water leak to stop though is to start by tightening the joint, even if it has calcified to ensure the leak doesn’t start again.

Can plumbers detect leaks?

Hidden water leaks cost homeowners hundreds to thousands of dollars annually. Not only is this money wasted on the water bill, but this includes money spent on repairing water damage by water leaks. Before you call a plumber, you can determine if you a water leak yourself.

First, turn all the water off inside your home and the outdoor spigots. Then go check the water meter, if it is running, and you know for certain that there isn’t any water on inside the house, then you have a water leak on your side of the meter. If the meter isn’t turning, but you see a sign of water leaks on the ceiling or walls, there is likely an internal water leak that needs the attention of a plumber.

Professional plumbers have leak detection equipment that will accurately and quickly find a water leak if there is one.  Before the leak detection equipment, they have today, they would use ground microphones and/or listening discs, acoustic listening devices, to find a water leak.

Other means a plumber has of detecting a water leak:

  • Plumbing cameras
  • Vision inspection tools

These are both valuable tools for a plumber because they can pinpoint the precise source of a water leak fast, especially if the plumber has a general idea of the location. The visual aid a plumber has with this equipment allows them to even evaluate the options to repair the water leak.

How Plumbers find leaks?

Unless a water leak springs happens in a clearly visible pipe, you may not realize you have a water leak until one of two things:  Your water bill is an excessive amount one month or you see water stains on the ceiling, floor, walls, or worse, a water puddle in or under your house.

This is where you realize the benefits of hiring a professional plumber. Water leak detection is one of their most sought-after services and skills.  The techniques that most licensed plumbers use that will give them an exact location of a water leak and why it is leaking are:

  • Acoustic listening device: As we mentioned earlier, ground microphones and listening discs have become a basic tool for plumbers to detect and pinpoint a water leak. This technology allows them to listen for water leaking noises through ceilings, floors, walls, even concrete. 
  • Heat scanner: There are some areas where the noise of the water leak is too deep for the acoustic method described above won’t work. In these instances, a professional plumber can use a heat scanner to pick up the change in temperature from where water isn’t escaping to where the water leak is located. 
  • Video pipe inspection: To get a precise leak detection, plumbers have miniature cameras today that are mounted on a long cable made of fiber optics. The camera relays the images to a monitor and the plumber can see the inside of water pipes, including drainpipes and sewer pipes. The plumber can see clogs, water leaks and other information that helps them provide a better service. 
  • Professional Training: For a professional plumber to provide the best detection of a water leak, the best tool they can have is a professional training, both for getting their license and ongoing training that keeps them up-to-date with the latest equipment and methods that allow them to do the best job possible.

Is there a tool to detect water leak?

We’ve mentioned several tools that plumbers use to detect where a water leak is, from sound detection that uses headphones and microphones to heat detection and cameras. The plumbers of yesteryear training will still rely on their own skills of listening for running water underground and running through water pipes. Is one way better than the others? It all depends on the plumber’s preference and the water leak location.  

water leaking through ceiling

What is a leak detection test?

Water leak detection equipment and testing are used to determine if and where a water leak has occurred. The various equipment and methods include the following:

  • hydrostatic testing
  • infrared
  • laser technology 

Each of these methods, plumbers are trained on how and when to use the equipment to find a water leak. They will often pair this with their own experience, giving their customers the best of both worlds. 

Water leaks are expensive two of which affect a homeowner directly: utility bills and water damage.  Another way it costs all of us is the waste of a natural resource that we expect and need daily. Repairing a water leak when it is discovered is one of the best ways to conserve that natural resource. For your water leak repair in Stryker, Bryan, and Napoleon, OH, call Woolace & Johnson today at 419-546-0065!

What happens when a water pipe bursts?

Water line dug up for repair

What causes a burst pipe?

A burst pipe causes so much grief and problems, it can be almost devasting, and the amount of damage it can cause can be a financial catastrophe for many. A burst pipe emergency can put anyone in a panic, especially inside the house. Everyone is running around trying to stop the gushing water and getting the water turned off until they get the burst pipe fix done.

No matter how long you have been a homeowner, a burst pipe can catch you off guard if you’ve never had to deal with one. Read on as we share some burst pipe insurance claim tips, examine the how, what, and when of burst pipes, and more.

Burst pipes are common household plumbing issues that every homeowner will have to contend with at some point. Whether it is with the plumbing network inside the house or the water pipes that supply the water to the house, they can burst without warning. This often leads to temporary chaos until the gushing water is stopped, and sometimes, it is an easy, minor fix. Other times, it can be a major repair that only a qualified plumber can handle.  Some common reasons that you may experience a burst pipe are: 

Frozen Water

If you had to pick things that happen in winter that is the worst that could happen to your home, frozen water would be in the top five. Freezing can occasionally subject water to temperatures -4 degrees Celsius. At this low temperature, water becomes solid and blocks any possible water flow, thus creating considerable pressure that accumulates at the blockage because of the expanded ice mass, subjecting the pipes to tension, resulting in a burst pipe.

External Forces

External pressure can affect water pipes and cause a burst pipe.  Most times, they bury water pipes underground and become subjected to pressure by construction equipment, passing cars, tree roots, and other heavyweights going over the area where the pipes lay. This type of pressure can squeeze the water pipes more than they can structurally handle, making them crack or burst, thus leading to a leaking or a burst pipe. 

Excessive Pressure

They construct water pipes to endure a specified level of water pressure. That specific level is usually labeled on the water pipe. When the water pressure limit is exceeded by more water being pumped than that specification, usually because the pipe is too narrow for the pressure, it results in a burst pipe. 

Incorrect Pipework and Layering

A licensed, qualified plumber that is experienced in plumbing to do pipe layering should install pipework and the connections. If any error in this process, it can lead to incorrect subjugation of water pressure, resulting in a burst pipe. An example is when a larger pipe is connected to a pipe is not as thick, the excessive pressure from the water can lead to a burst pipe. 

Old Pipework

They design metal or plastic water pipes to have only a limited life expectancy. Depending on the weather elements that are exposed to and if regular maintenance to the plumbing system was in place, their lifespan could be longer than anticipated or shorter. Engineers have concluded that water pipes can last 20 years longer unless they are structurally degraded to where they can no longer withstand significant water pressure. Metal pipes are affected by corrosion over time and plastic pipes become brittle, thus, the slightest amount of pressure from the water can cause a burst pipe. 


Clogs often result in pipe blockages that consequently result in a burst pipe.  Water pipe clogs are typically the result of accumulated minerals that coagulate on the inner surface of the pipes. A clog can also happen because of solid materials carried through the pipes by water. A massive clog will hinder the water flowing downstream and lead to the incredible pressure accumulating upstream. This will result in a burst pipe and/or leak. 


Ground movement isn’t as common as the other issues we’ve discussed, but it can cause an extreme force on a pipe, such as an earthquake or tremor. In some areas of the country, freezing temps can cause the ground to heave. In any of these situations, the ground moved down, laterally, or up a slight bit can cause a burst pipe. 

Connected Improperly

Pipe connections are a vulnerable point in water pipelines. If they are connected improperly or they are weak, the extreme pressure they are exposed to can cause a burst pipe.

Can pipes burst in warm weather?

Every homeowner should make it a routine to check the water pipes all year long for possible leaks, signs of water damage, or possible burst pipe.

  1. Rusted Pipes: Pipes will only last for so long, over time, they rust and wear out. Too much rust makes them vulnerable to a burst pipe.  
  2. Hard Water: Hard water is caused by a high content of calcium and magnesium, and while these are not harmful to us, they are hard on water pipes, causing corrosion, holes and eventually burst pipe.
  3. Poor Installation: Pipe leaks that are installed poorly have ill-fitted connections.

How do you know if a water pipe burst 

The following are seven indications you may have a burst pipe.

  • Water Pressure Fluctuates Up and Down
  • The Water Has Strange Appearance or Color
  • A Rotten Eggs Odor
  • Puddles Under Sinks
  • Sound of Water Running with Faucets Off
  • Noisy Pipes
  • Excessive Water Bill

How do you deal with a burst pipe?

There are things worse than a burst pipe, but as a homeowner, when it happens, it is hard to imagine that. Winter is the most troubling time for weak water pipes, so when a burst pipe happened, you must act fast. We recommend the following steps:   

  • Turn the water off at the main – this will completely turn your water supply off. If the water has reached any electrical sockets, breaker box or fuse box, turn the electricity off too.
  • Drain the water faucets – cold water taps first, flush the toilet to empty the tank, turn off the water heater, then empty the hot water taps.  
  • Open the cabinets – this lets warm air in, important during the winter.
  • Clean up -With any luck, you’ll know right away where the water came from, but either way, clean up the mess so you don’t have water sitting somewhere to form mildew and mold.
  • Document – Once you have the emergency water flow contained, take pictures and document the damage to your home and your possessions. Throw nothing away, you’ll need this for evidence for the insurance adjuster.
repair for a water line

How do you stop a leaking pipe?

If you find a small leak, using a compound stick to rub over the hole will usually stop the leak. These can be used without turning the water off and can be applied to wet pipes. For a larger hole, you must turn the water off, allow the pipe to completely dry, then apply an epoxy paste and allow it to thoroughly dry before turning the water on.

A burst pipe isn’t any fun and can be catastrophic on many levels. However, with preparation, when it happens, you can minimize that catastrophe and the damage that can result from a burst pipe, just as regular inspection of your roof can catch possible issues before they become catastrophic problems. Call 419-546-0065 today for burst pipe repair in Stryker, Bryan, and Napoleon, OH.

Is a Clogged Drain an Emergency?

A Clogged Kitchen Sink.

Is a clogged drain an emergency?

While a clogged drain is often a minor problem that can be easily resolved, in some cases it can become an emergency requiring a professional for drain cleaning. If you have any flooding, for instance, that’s a definite sign of clogged drains, and can lead from a simple overflow to a sewage back up. When you have recurring clogs, even if clean your drains regularly you may also want to call in a professional. Multiple clogs are a definite reason to get a professional. This is often an indication of a clog in your main drain system that requires a plumber with the right skills and tools to get the clog cleared. 

While it’s common to see your water drain slowly when there is a clog, you can usually use a plunger and drain cleaner to clear it. If this doesn’t work, a professional with a plumber’s snake or auger, might be the solution to getting the water flowing again. If you’re hearing gurgling noises or if foul smells are coming from the drains you probably have a serious clog, possibly a sewer problem. Black sludge coming up also indicates a serious clog that could be create a health hazard.

Whether you have a plumbing emergency or a basic clog, if you want to have a professional drain cleaning service clear the clog, count on the team at Woolace & Johnson. We will get your clogs cleared safely and effectively. Get help today by calling 419-546-0065.

How do plumbers unclog drains?

When plumbers come out to unclog your drains, they apply their skills and use special tools to get it cleared. For major clogs, plumbers have two major tools they can use to unclog your drains:

  • Motorized drain auger: A motorized auger or drain snake, which is a large metal coil, gets sent down into the drain until it hits  the clog. The motor drills the coil into the clog until it breaks up.
  • Hydro-jetter: This device uses a hose and directional nozzle to send high-powered jets of water blast through the drain to clean it, washing away all debris and material clinging to the drainpipe.

How often should drains be cleaned?

Regular maintenance is good for all areas of the house including your plumbing. Drain cleaning should be a part of your regular maintenance, and it’s recommended that you have your drains cleaned about every two years. This is especially true if you have an older home to clear out any muck that’s collected over time. Regular cleaning keeps your drains clear of clogs.

While regular maintenance will keep your clogs cleared, to keep your commercial building cool and energy efficient you may want to consider a cool roofing solution.

How much does drain cleaning cost?

For simple clogs, you may only need to spring for a plunger and some kind of drain cleaner, although we don’t recommend strong chemical cleaners that can damage pipes over time. For serious clogs, however, you probably want to call a plumber for drain cleaning. For clogs in tubs, showers or bathroom or kitchen sinks or toilets, you can expect to pay anywhere between $110 to $215, whereas cleaning out a laundry drain will cost about $150. Major clogs in your sewer line will cost a little bit more. Sewer drain cleaning will cost between $200 to $400.

What is a drain cleaning snake

A drain cleaning snake or plumber’s snake or auger is a device used to clear drains of clogs. These devices consist of a coiled metal wire and either a crank or motor to send the wire through the drain. The coiled wire is sent through the drain and drills through the clog to break it up.

Drain bladder vs snake

A drain bladder is another device plumbers use for drain cleaning, and is used in certain circumstances over a drain snake. Certain kinds of clogs like grease clogs may not be wholly cleaned using a snake. The bladder forces water through the system under high pressure to clear the clog. It’s attached to a water hose and filled with water. As it fills with water, it expands and then the water is released to scour the drain and clean it. The bladder can also be used in conjunction with a drain snake. The bladder is used first to clear as much of the clog as possible, and then the snake is run through the drain afterward to finish up.

Does baking soda unclog drains?

For minor clogs, a mixture of baking soda and vinegar can be used to clean the drain. To clean the drain, hot water is first poured down it, followed by a solution of vinegar and water (about 1 cup each) and baking soda. As the vinegar and baking soda bubbles, it loosens the clog. Insert the drain plug for about 5 to 10 minutes before flushing with boiling water. The process may need to be repeated until the clog is cleared. 

What is the best drain cleaning product

Different drain cleaners are used for different kinds of clogs. Enzyme-based drain cleaners can be used monthly to clean out clogs caused by material like hair or paper but won’t clear out grease or soap scum. Alkaline based cleansers are best for grease, food, and soap scum. These cleansers turn the clogged material into a soap-like material that dissolves under water. Acidic cleansers use sulfuric or hydrochloric acid can clear just about any kind of clog within 15 minutes. These cleansers are highly corrosive and toxic, and not often sold with other drain cleaners. Frequent use of strong chemical cleaners can affect your pipes, in particular those made from aluminum chrome, stainless steel or galvanized steel.

A Plumber Uses a Manual Drain Snake to Unclog a Sink.

Drain cleaning near me

When you have a major clog and want a reliable professional for drain cleaning in Stryker, Bryan, and Napoleon, OH, get in touch with Woolace & Johnson. We will get your drains cleared effectively and safely. Give us a call at 419-546-0065 to get help quickly.

What is HVAC Servicing?

Technician Working on HVAC Service

Maintaining Your HVAC System

There are several appliances and features that make your home run. Most of them were big investments that you likely spent quite a bit of money on. Don’t waste all that money by neglecting any appliance in your home. Scheduling regular maintenance and service for everything, including your HVAC system, will ensure long-lasting and high-functioning machines. Now that the weather is starting to get lower and lower, it is time to schedule HVAC service in Stryker, Bryan, and Napoleon, OH. For that, rely on Woolace & Johnson. Call us at 419-546-0065 to get started.

HVAC Service Including Thermostat Repair

What is Included in an HVAC Service?

Both the furnace and air conditioner in your home are high-demand appliances. That means they require quite a bit of energy to operate, but they also require quite a bit of attention. Too often we see homeowners install an HVAC system and never care for it until it’s too late. Rather than wait for those catastrophic, inconvenient moments, we suggest you start investing in HVAC service. This is a process you can schedule regularly with an HVAC technician. They will come out to your home to inspect your system for problems and concerns. So what is included in a servicing appointment? 

  • Thermostat Check: One of the first areas a technician will check is the thermostat. They make sure it is properly set up and not miscommunicating with the entire system. 
  • Electrical Connection Check: The technician will also check electrical connections are snug. They’ll make sure nothing is using too much power or wasting power. 
  • Coil Check: Your technician will then check the condenser and evaporator coils on the air conditioner. These two can get coated with dirt and debris resulting in a lack of cool air.
  • Outside Unit Check: While examining the coils, the technician will examine the whole outside A/C unit. They’ll check that the unit is clean and not clogged with leaves, dirt and other items. 
  • Fan and Belt Check: For both the A/C and your furnace, a big part of service includes checking and possible replacing fans and belts that are used to produce air. 
  • Air Filter Check and Replacement: On the air conditioner, there are air filters that need to be replaced. Throughout your home, you’ll want to change duct filters at least once a month, but the ones in your A/C can wait until for the technician to change.

Probably the main concern that most homeowners have is knowing when to service an HVAC system. At a minimum, you should schedule an appointment for service at least once a year. If possible, twice a year is best, but you’ll still see good results with a once a year service. To make sure you are always up to date with your services, there are subscription and contract plans. What is an HVAC service contract? It’s usually a monthly or yearly payment plan that helps to ensure you will have scheduled maintenance and service for your HVAC system. 

HVAC Service vs Tune-Up

Is there a difference between an HVAC service and a tune-up? Ultimately, no there isn’t. The two are typically used to qualify the same thing: HVAC service and cleaning. During a service or tune-up, the technician is looking for areas of concern and, if possible, can begin some repairs right then and there. The word service and tune-up are essentially interchangeable in this sense. You’ll generally want to service or tune-up an HVAC system in the spring and fall, just before the weather gets really bad. Doing so will ensure there are no surprises and no issues during severe weather days. It’s also a good idea to have other areas of your home, like the cool roofing, checked to ensure that everything is operating smoothly. 

Frequently Asked Questions

  • How much does it cost to service an HVAC system?
    • The overall cost will vary from technician to technician. Most will include a servicing fee which can be anywhere from $50 to $100. Meaning, your total cost for servicing could be in the $2-300’s. 
  • What is HVAC servicing?
    • This is the process of examining and inspecting your HVAC system. A technician will go through looking for areas of wear, concern, damage and more. If they find anything, they’ll document it and go over repair or replacement options with you. 
  • What is HVAC and how does it work?
    • HVAC stands for heating, ventilation, and air conditioning. It’s generally the central system the provides heat and cool air throughout you home. The system utilizes electricity or gas to push forced air throughout the home. The air conditioner uses coolant and condenser coils to cool the air before sending it through the ducts. 
  • What is the difference between HVAC and air conditioning? 
    • There really is no difference. HVAC stands for heating, ventilation, and air conditioning. The abbreviation is to reference every component of the forced air system in your home and air conditioning happens to be on that list. 
  • What is the purpose of HVAC system?
    • The purpose of an HVAC system is to provide a system for hot or cold air to flow through your home. Your heating and air conditioner use the same ventilation to push the air throughout the property. 
Freon Tank Needed for HVAC Service

Connect With Our Team for More Information Today

For more information about our HVAC service in Stryker, Bryan, and Napoleon, OH, dial 419-546-0065 to connect with Woolace & Johnson today. 

Why Is My AC Not Cooling Well?

A Technician Tests an Air Conditioner.

Why is AC not working?

The last thing you want to discover when it gets hot outside is that your air conditioner is not working. If you are wondering, “What if AC is not cooling?” The answer could be simple as simple as adjusting your thermostat or it could require air conditioning repair. If you have a central air conditioner that’s not turning on, you may just have to adjust the thermostat. Similarly, if you have a wall unit, you will want to check the temperature setting, as well as checking to see if the electricity is flowing to the system. If you are unable to get the unit to turn on, it’s time to call a reliable HVAC service to get the unit repaired. 

If your AC is not working and you need AC service in Stryker, Bryan, and Napoleon, OH, you can count on the professionals at Woolace & Johnson. Schedule a repair by calling 419-546-0065.

Your air conditioner not turning on is just one sign your air conditioner needs repair. Some other signs you need air conditioning repair include:

  • Blowing warm air
  • Exhibiting poor air flow
  • Wrong thermostat setting
  • Leaking
  • Bad or unusual odors
  • Making loud noises
  • Electric bills are unexpectedly increasing
  • Aging (the unit is more than 10 years old)

Why is my AC running but not cooling?

One frequent problem people have with their air conditioning is the system is coming on but it’s blowing warm air. This may be a sign you need air conditioning repair. Any number of issues could be causing this problem. The first thing to do is check all your vents to see if they are open and then check the thermostat to see if set to the temperature you want. If the vents or thermostat aren’t causing the problem the primary suspect is most often a dirty air filter. A dirty air filter can prevent proper air flow or cause the evaporator coils to freeze and slow air flow as well. Cleaning or changing the filter regularly is essential for the AC to operate properly. Another possibility is a problem with the fan or fan motor. Your fan might not be getting enough electrical power or you may have a refrigerant leak. 

Why won’t my AC cool my house down?

Sometimes, instead of blowing warm air, the AC is cooling, but it’s not getting the whole house cool. You may wonder, “Why is AC not cooling enough?” As when it’s blowing warm air, the AC might not be cooling enough for many reasons. If any of your vents are closed, that could limit air flow throughout the house. Make sure all the vents are open so the home cools evenly. Another possibility is that you may have a refrigerant leak. It’s also possible the system you have is the wrong size for your home. If the system is too large, it will cycle off and on quickly, and not cool efficiently. Too small of a system has to work much harder to cool the home. Having the wrong size of AC may lead to the system breaking down prematurely. 

Finally, if your system is more than 10 years old, it may be time to consider replacing it. The older a system gets, the more its parts will wear, the more often it will require repairs. Aging and worn parts put a lot more strain on the system, and it works less efficiently.

If your air conditioner isn’t cooling enough, it’s possible the problem may not be in the system at all. Your roof affects how cool or warm your home is and can affect your home’s energy efficiency. One way to improve your home’s energy efficiency is through roof restoration.

Air conditioner repair vs. replace

It can sometimes be difficult to decide whether you just need air conditioning repair, or whether the unit needs to be replaced. One of the major factors in the decision will be the air conditioner’s age. Although an air conditioner can be as good as new at 10 years old, it’s not often likely. Most air conditioning systems are designed to last about 10 to 15 years. The older an air conditioner gets, the more likely it will begin to break down frequently. If you are beginning to spend more in repairs than it would cost to get a new unit, you’ll save money in the end. You can use a simple formula to determine whether it’s better to repair or replace your air conditioner. If you multiply the cost of a repair by the unit’s age and that number turns out to be more than the price of a new unit, then a replacement is in order.

Air conditioning repair emergency

Anytime your air conditioner is malfunctioning can be air emergency requiring immediate air conditioning repair. Any issue from refrigerant leaks to fan motors stopping because they aren’t getting enough power could be an emergency. If your AC is down for any reason in Stryker, Bryan, and Napoleon, OH, and you need an emergency repair, give our team at call at 419-546-0065.  We provide emergency air conditioning repair service 24/7.

Air conditioning repair parts

When an air conditioner breaks down, it’s usually just one part that causes the whole system to fail. Every part in an air conditioner works in unison with the other parts to make the system run  smoothly. While we don’t sell parts individually, if you need a part replaced or repaired professionally, we are the AC service company to rely on. Our technicians are highly trained to repair and replace parts for air conditioning systems from many of the leading manufacturers.

A Technician Checks the Wiring on An Air Conditioner.

Air conditioning repair for home

When your air conditioner breaks down, don’t stay stuck in the heat. We are the team to call for air conditioning repair in Stryker, Bryan, and Napoleon, OH. You can reach us by calling 419-546-0065.

How do I clear my main sewer line?

Worker Finishing Sewer Line Repair

Dealing with Drainage Issues in Your Home

Are you noticing your sinks don’t drain water quickly anymore? Does the water pressure vary when you turn the tap on? While variations in draining and water pressure are normal, drastic changes are not. Consistency is a usual sign of a plumbing system that is in good condition, but when clogs or damage happen, things can go wrong. If you are noticing any issue with the way your water comes and goes from your home, you may be in need of assistance. For that contact Woolace & Johnson, 419-546-0065, about sewer line repair in Stryker, Bryan, and Napoleon, OH.

Digging Up Trench for Sewer Line Repair

Identifying Sewer Line Problems

If you are dealing with slow drainage or water pressure issues, you may have a sewer line problem. How can you tell? There are a few signs to pay attention for, like:

  • Frequent Backups: Drains that always seem to be clogged no matter what you do are a big sign of a sewer line clog. Don’t use “liquid drain cleaners” but rely on a professional instead.
  • Strange Reactions: If you notice when you flush the toilet, the bathtub drain overflows, that is a sign of a sewer line clog. Something is preventing waste or water from following its normal course, so it has to go somewhere else.
  • Yard Flooding: When you start to notice water ponding in your yard, it could be a sign of sewer line damage. If there is damage from tree roots or shifting ground, it can cause a leak that is flooding your property.
  • Bad Smells: One tell-tale sign of a sewer line clog or problem is lingering smells. If you are starting to notice, or have noticed a bad smell coming from a shower or tub drain, something isn’t right. There may be a block or a break causing waste to be forced elsewhere.

As soon as you’ve identified an issue, the next step is to call a professional for a sewer line cleaning. But before they can do that, they need to inspect your plumbing to determine what is causing the issue in the first place.

Causes of Sewer Line Clogs

There are many causes for a sewer line clog and it can be difficult to determine that cause without some help. Scheduling an appointment with sewer line cleaning contractors so they can inspect the pipes is the best route to take. They can use video equipment to find where a clog may be. Once you know that, you can then take the necessary steps to correct the issue.

  • Pipe Damage: Damage to your pipes will cause regular issues with your drainage. When older copper pipes begin to corrode, they can leak water into your home or around your property. If this happens, you’ll notice a drop in water pressure and slow drainage.
  • Sagging: One thing that  is hard to see, but a big cause for clogs is sagging pipes. What that means is, when the ground shifts or moves around your pipes, it can cause them to droop and sag. Should this happen, connections can become loose resulting in water leaks.
  • Tree Root Infiltration: Probably one of the most common reasons for sewer line clogging is tree roots. A sewer line clogged with tree roots won’t be able to drain or move water effectively. It can also mean that your pipes may be damaged or broken.
  • Flushing Dirt and Debris: When an excess of the wrong things are flushed down the drain, they can quickly collect in your sewer line creating a clog. Dirt, debris, hair, and more get distractedly washed down your drains on a consistent basis leading to a greater chance of clogs and blockages.
  • Grease: The number one culprit for a sewer line clog is grease. When grease is washed down a drain, it hardens around the interior pipes. It also collects things like dirt and hair, which only add to a clog.

The best way to avoid or prevent clogs in the future is to schedule regular sewer line cleaning services. Doing so will ensure your plumbing is always in good condition. That being said, it’s still important to schedule separate inspections of your plumbing. Think of it the same as when you need to replace your roof. You may schedule regular maintenance, but you do always want someone to inspect your roof or your plumbing before you begin repairs of any kind.

Frequently Asked Questions

  • How often should sewer lines be cleaned?
    • As a good preventative measure, homeowners should schedule cleanings every 18-22 months – so about once every 2 years. If you are experiencing issues more often, then you will need to schedule a time for a plumber to take video of your lines.
  • How much is sewer line cleaning?
    • On average, a sewer line cleaning will cost about $299. It can range from $173 to over $400 depending on the type of service needed. Snaking, or rodding, will usually be the cheapest route.
  • What do you do if your sewer line is clogged?
    • There are several drain cleaning products on the market that can help you unclog or remove as much of a clog from your drains. But if your main sewer line is clogged, you will need to contact a company to provide cleaning services.
  • Why does my main drain keep clogging?
    • Something is being flushed down your drains, creating clogs and blockages. If it’s not that, then something is preventing the drain from efficiently expelling water and waste. That could be tree roots or damaged piping.
  • How much does it cost to camera a sewer line?
    • The average is between $250 and $500 to take video of the inside of a sewer line. It could cost more or less depending on how much pipe line needs to be viewed and if the inspection is a solo service or being done in conjunction with another service.
Completed Sewer Line Repair

Connect With Woolace & Johnson for More Services!

Want to know more about our services? Give us a call at 419-546-0065 to talk about what we can do to help you, including sewer line repair in Stryker, Bryan, and Napoleon, OH.

Can You Have A Water Leak And Not Know It?

bursted copper pipe with water leaking out.

Learn More About Pipe Leaks

When you notice water dripping from your wall from pipes leaking from wall it may feel as if a horror movie is taking place with an unusual theme centered on home maintenance. Yet the reality is that leaking pipes and other issues that may arise from the plumbing of a home or business is perfectly normal. Oftentimes, people live on properties where they didn’t decide on the piping materials or connections upon initial construction. Sometimes loosened pipe connections or poor piping materials can play a large role in leaking pipes and the factors that come with forming a pipe leak. When a leaking pipe is present be sure to look out for the signs present or rely on the professional services of a plumber for leak detection so pipe repairs can begin! It’s important to stop a leak in their beginning stages so other systems of the property aren’t affected or aggravated which could call for more repairs.

What causes leaking pipes?

There can be many reasons as to why you have a leaking pipe. Your pipes are essentially behind walls and underneath the ground and can be impacted by a variety of reasons such as outside pressures, the type of piping material, poor initial installations, weather and a variety of other issues. Take for example piping underneath the ground, the foundation of your home is directly connected to your piping so whenever there are shifts to your soil and your foundation moves as a result so do your piping. This causes certain weights of pressure onto the pipes which can cause connections to loosen where leaks can escape or even cause wear caused by corrosion. With corrosion, chemical elements of the surrounding soil can react negatively with the elements of piping materials which can cause wear from the outside in. As far as inner corrosion, water carries contaminants from travel and depending on the degree of water pressures this can wear piping material and cause corrosion from the inside out. When the winter season comes around and pipes aren’t properly insulated you may also be susceptible to pipe freezes. This is where water freezes inside pipes, expands on piping material and causes leaks or pipe bursts. Finally, root invasion with outside piping materials made from porous clay is a danger that often happens with older home constructions. Since roots will grow towards a source of water, even if there’s a crack or small misconnection the roots will typically grow into the openings and in some cases completely take over the inner areas of the piping systems.

With piping inside the house, you can see corrosion from household cleaning products that contain chemicals which cause premature pipe wear. Certain seals and connections with kitchen or bathroom drains can wear and you may see leaks underneath the counter as well. Clogs can form in these drains from food as well as with sinks and bathroom drains from hair, mildew, soap scum and other factors. Inside drains are just as susceptible to premature wear with higher water pressures which can loosen piping material or cause inside corrosion as well.

Can clogged pipes cause leaks?

Clogged pipes are a whole other factor that can influence the progression of a leaking pipe. Essentially you can think of it as a block where water will ultimately build up in pressure and aggravate corrosion or enlargen cracks in the pipe. Water will naturally seek alternate paths of escape and make it’s way out through these openings.

A leaking pipe.

Signs of a Leak

  • Cracks in Foundation
  • Water Stains/Wet Spots
  • Increases Water Bills
  • Mold & Mildew
  • Water Meter Ticking
  • Unpleasant Odors

How do plumbers check for leaks?

Leak detection can vary depending on outward signs or if pipes are hidden behind walls or underneath the ground. Sometimes you may even determine that there are no leaking pipes with water problems stemming from other issues of the home like with loosened roof flashing. As of such, there are technological tools available nowadays that can track the location of a water leak from vibrations transmitted through water movement.

How do you temporarily stop a leaking pipe?

With the piping material of drains inside homes, you may be able to temporarily stop a leaking pipe with plumber’s putty (particularly with kitchen drains) or plumber’s tape. For larger pipe systems it would be better to simply go to the main water stop valve and turn off your water systems until pipe repairs can be made.

How much does it cost for a plumber to fix a leak?

When you’re looking for a leaking pipes fix it’s important to be aware of repair costs. As of such, average leaking pipe repair costs range from $150-$350 with leak location testing either being included with the service or adding an additional cost of around $100. If drywall needs to be repaired expect more costs to be added to the service if a plumbing company also offers that type of service.

If you’re experiencing a leaking pipe in Stryker, Bryan, and Napoleon, OH call 419-546-0065 with Woolace & Johnson today!